United Technologies Corporation Process Technician I - 2nd Shift in Wilson, North Carolina

Job ID: 63578BR

City: Wilson

State: North Carolina

Country: United States

Category: Operations

Job Type: Full Time

Description:

Function:

This position is responsible for testing, troubleshooting, and processing production units. Ensure work is accomplished with high quality, in a timely fashion and is compliant with all company, city, state and federal regulations.

Duties and Responsibilities:

  • Test products for load capabilities, mechanical characteristics, polarity, voltage, amperage, inductance, shorts, grounds, circuits continuity and physical properties.

  • Troubleshoot analog and digital circuits. This position requires troubleshooting to the component level.

  • Perform routine repair activities on avionics equipment including surface mount and thru hole solder repair.

  • Recommend efficiency enhancements for fast-paced electronic troubleshooting environment.

  • Maintain materials, equipment, and work area in a clean and orderly condition.

  • Comply with all rules and regulations of United Technologies, including, but not limited to: Environmental Health and Safety, Ethics, International Trade Compliance and Human Resources.

  • Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.

  • Check work methods and results for conformance to standards and re-instruct as required.

  • Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.

  • Other duties as assigned.

Education and Experience:

  • High school diploma or equivalent required.

  • Must have an electronics background with 3-5 years complimentary work history in a manufacturing environment or service environment.

  • Experience in dielectric and hypot testing and safety measures involved when performing test.

Qualifications:

In order to be considered for this position, candidates must have:

  • Knowledge of electronic theory including microprocessor based products.

  • Knowledge of all ESS procedures and be proficient in performing the test.

  • Demonstrated proficiency with test equipment such as oscilloscopes and logic analyzers including triggering, waveform capture and comparisons.

  • Knowledge of electronic theory including microprocessor based products.

  • The ability to give direction and guidance in electronic troubleshooting techniques and repair.

  • The ability to schedule troubleshooting activities to complement production requirements.

  • The ability to interpret schematics and/or technical drawings.

  • Strong written and verbal communication skills.

  • Attention to detail in order to ensure safety and quality.

  • Strong organizational skills and ability to multi-task.

  • The ability to work in a team to support work capacity in a fast-paced environment.

  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.

  • Demonstrated analytical skills and problem-solving abilities.

  • The ability to take direction from more experienced coworkers, leads and supervisors.

Additional Requirements:

  • Frequent standing, sitting stooping.

  • Occasional climbing, balancing, crouching, reaching.

  • Must be a U.S. citizen, Permanent Resident Alien, or person granted status as an asylee.

  • Must be available for overtime, including extended workdays and weekends.

  • Comply with EH&S policies and procedures at all times, including wearing appropriate PPE. Attend EH&S trainings as required. Report unsafe practices and/or conditions to the appropriate individuals to ensure prompt resolution of potential hazards. Recommend improvements to EH&S practices in order to create a safer workplace.

Qualification:

Job Responsibilities

  • Test products for load capabilities, mechanical characteristics, polarity, voltage, amperage, inductance, shorts, grounds, circuits continuity and physical properties.

  • Troubleshoot analog and digital circuits. This position requires troubleshooting to the component level.

  • Perform routine repair activities on avionics equipment including surface mount and thru-hole solder repair.

  • Recommend efficiency enhancements for fast-paced electronic troubleshooting environment.

  • Maintain materials, equipment, and work area in a clean and orderly condition.

  • Comply with all rules and regulations of United Technologies, including, but not limited to Environmental Health and Safety, Ethics, International Trade Compliance, and Human Resources.

  • Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.

  • Check work methods and results for conformance to standards and re-instruct as required.

  • Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.

  • Other duties as assigned.

Experience & Skills

  • Experience in dielectric and hypot testing and safety measures involved when performing test.

  • Knowledge of electronic theory including microprocessor-based products.

  • Knowledge of all ESS procedures and be proficient in performing the test.

  • Demonstrated proficiency with test equipment such as oscilloscopes and logic analyzers including triggering, waveform capture and comparisons.

  • Knowledge of electronic theory including microprocessor-based products.

  • The ability to give direction and guidance in electronic troubleshooting techniques and repair.

  • The ability to schedule troubleshooting activities to complement production requirements.

  • The ability to interpret schematics and/or technical drawings.

  • Strong written and verbal communication skills.

  • Attention to detail in order to ensure safety and quality.

  • Strong organizational skills and ability to multi-task.

  • The ability to work in a team to support work capacity in a fast-paced environment.

  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.

  • Demonstrated analytical skills and problem-solving abilities.

  • The ability to take direction from more experienced coworkers, leads, and supervisors.

  • 50% Frequent standing, sitting stooping

  • 50% Occasional climbing, balancing, crouching, reaching

  • Must be available for overtime, including extended workdays and weekends.

  • Comply with EH&S policies and procedures at all times, including wearing appropriate PPE. Attend EH&S trainings as required. Report unsafe practices and/or conditions to the appropriate individuals to ensure prompt resolution of potential hazards. Recommend improvements to EH&S practices in order to create a safer workplace.

Education: Basic Qualifications

  • HS Diploma or GED Equivalent

  • Must be able to work 2nd shift 3:30 pm to 12am

  • Workable Basic Computer Skills

  • 3-5 Years complimentary work history in a manufacturing environment or service environment.

Nothing matters more to UTC Aerospace Systems than our strong ethical and safety commitments. As such, all U.S. positions require a background check, which may include a drug screen.

UTAS4220181

United Technologies Corporation is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Qualification:

Job Responsibilities

  • Test products for load capabilities, mechanical characteristics, polarity, voltage, amperage, inductance, shorts, grounds, circuits continuity and physical properties.

  • Troubleshoot analog and digital circuits. This position requires troubleshooting to the component level.

  • Perform routine repair activities on avionics equipment including surface mount and thru-hole solder repair.

  • Recommend efficiency enhancements for fast-paced electronic troubleshooting environment.

  • Maintain materials, equipment, and work area in a clean and orderly condition.

  • Comply with all rules and regulations of United Technologies, including, but not limited to Environmental Health and Safety, Ethics, International Trade Compliance, and Human Resources.

  • Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.

  • Check work methods and results for conformance to standards and re-instruct as required.

  • Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.

  • Other duties as assigned.

Experience & Skills

  • Experience in dielectric and hypot testing and safety measures involved when performing test.

  • Knowledge of electronic theory including microprocessor-based products.

  • Knowledge of all ESS procedures and be proficient in performing the test.

  • Demonstrated proficiency with test equipment such as oscilloscopes and logic analyzers including triggering, waveform capture and comparisons.

  • Knowledge of electronic theory including microprocessor-based products.

  • The ability to give direction and guidance in electronic troubleshooting techniques and repair.

  • The ability to schedule troubleshooting activities to complement production requirements.

  • The ability to interpret schematics and/or technical drawings.

  • Strong written and verbal communication skills.

  • Attention to detail in order to ensure safety and quality.

  • Strong organizational skills and ability to multi-task.

  • The ability to work in a team to support work capacity in a fast-paced environment.

  • Intermediate computer skills in terms of typing, navigating screens and learning new software programs.

  • Demonstrated analytical skills and problem-solving abilities.

  • The ability to take direction from more experienced coworkers, leads, and supervisors.

  • 50% Frequent standing, sitting stooping

  • 50% Occasional climbing, balancing, crouching, reaching

  • Must be available for overtime, including extended workdays and weekends.

  • Comply with EH&S policies and procedures at all times, including wearing appropriate PPE. Attend EH&S trainings as required. Report unsafe practices and/or conditions to the appropriate individuals to ensure prompt resolution of potential hazards. Recommend improvements to EH&S practices in order to create a safer workplace.

United Technologies Corporation is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.